Iranian Journal of Materials Science and Engineering

Mendeley  

Zotero  

Kumar R, Chandra Sharma Y, Vidya Sagar V, Bhardwaj D. Chsracterization of Low Temperature Plasma Ion Nitriding (PIN) of Inconel 600 and 601 Alloys. IJMSE 2020; 17 (2) :63-72
URL: http://ijmse.iust.ac.ir/article-1-1211-en.html

In this study an effort has been made for the plasma ion nitriding (PIN) of Inconel 600 and 601 alloys at low temperatures. After plasma ion nitriding, microstructure study, growth kinetics of nitrided layer formation and wear properties were investigated by various characterization techniques such as; scanning electron microscope (SEM), X-ray diffraction (XRD) analysis, micro-hardness measurement and wear test by pin on disk technique. It was found that, surface micro-hardness increases after PIN process. A mix peak of epsilon (ε) phase with fcc (γ) phase was detected for all temperature range (350 ⁰C to 450 ⁰C), while the chromium nitride (CrN) phase was detected at elevated temperature range ~450 ⁰C in inconel 601 alloy. The calculated values of diffusion coefficient and activation energy for diffusion of nitrogen are in accordance with the literature. Volume loss and wear rate of the plasma nitrided samples decreases, but it increases as PIN process temperature increases.