Volume 10, Issue 1 (march 2013)                   IJMSE 2013, 10(1): 46-56 | Back to browse issues page

XML Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Sh. Shahriari, M. Ehteshamzadeh. THE EFFECT OF APPLIED VOLTAGE AND Mg CONTENT OF THE SUBSTRATE ON THE MICROSTRUCTURE AND CORROSION PERFORMANCE OF THE ANODIZED AL WITH PEO TECHNIQUE. IJMSE 2013; 10 (1) :46-56
URL: http://ijmse.iust.ac.ir/article-1-525-en.html
THE EFFECT OF APPLIED VOLTAGE AND Mg CONTENT OF THE SUBSTRATE ON THE MICROSTRUCTURE AND CORROSION PERFORMANCE OF THE ANODIZED AL WITH PEO TECHNIQUE
Sh. Shahriari , M. Ehteshamzadeh
Abstract:   (25391 Views)
Abstract: Plasma electrolytic oxidation (PEO) technique was used to prepare ceramic coatings on the casted aluminum alloys containing ~5 and ~9.5 wt.% Mg. The applied voltage was controlled at 450V and 550V for evaluating the effect of this main parameter, as well as, magnesium content of the substrate on the microstructure and electrochemical corrosion behavior after PEO treating. The results of X-ray diffraction confirmed formation of galumina and MgSiO3. It was found that higher applied voltage caused fewer and minor discharge channels which led to higher corrosion resistance. Also, increasing of magnesium content of the substrate caused decreasing of polarization resistance, which could be associated to the formation of MgSiO3.
Keywords: Corrosion; Al-Mg alloys, PEO, Potentiodynamic polarization, EIS.
     
Type of Study: Research Paper | Subject: Surfe coating and corrosion
Add your comments about this article : Your username or Email:
CAPTCHA
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb