Iranian Journal of Materials Science and Engineering
Iran University of Science & Technology
Wed, Jul 17, 2024
[Archive]
Volume 2, Issue 4 (Jul 2005)
IJMSE 2005, 2(4): 9-15 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
HADIAN A.M., ABU FANAS S.H.. STRENGTH AND FRACTURE TOUGHNESS OF WHISKER REINFORCED DENTAL RESIN-BASED COMPOSITES. IJMSE 2005; 2 (4) :9-15
URL: http://ijmse.iust.ac.ir/article-1-65-en.html
URL: http://ijmse.iust.ac.ir/article-1-65-en.html
Abstract: (33093 Views)
Enhancing the properties of dental resin composites is of interest to researchers. The objective of the present investigation was to improve the strength and fracture toughness of dental composites via addition of silicon carbide whiskers and substitution of commonly used filler materials with stabilized zirconia ceramic powder. It was also intended to study the effect of powder- to- whisker ratio on mechanical properties of the resultant composites. The flexural strength and fracture toughness of composite samples with different whiskers loadings were measured. It was found that addition of whiskers to the composites enhances the mechanical properties of the composites. The strength and fracture toughness increased by increasing the amount of whiskers. The flexural strength of a composite having 60wt% whisker and 10wt% zirconia powder was about 210 MPa while that of the composite having only 60wt% ceramic powder was about 110 MPa. The microstructural examinations revealed that reinforcing mechanism was whiskers pull-out as well as crack deflection.
Keywords: DENTAL, RESIN, COMPOSITE, SILICON CARBIDE, WHISKERS, ZIRCONIA, FLEXTURAL STRENGTH, FRACTURE TOUGHNESS
Type of Study: Research Paper |
Subject:
Ceramics
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
