Search published articles


Showing 3 results for Surfactant

Ghobeiti Hasab M., Seyyed Ebrahimi S.a., Badaee A.,
Volume 2, Issue 2 (6-2005)
Abstract

In this research the sol-gel auto-combustion method was used to prepare strontium hexaferrite nanopowder. A solution of distilled water, ferric and strontium nitrates, citric acid, trimethylamine, and n-decyltrimethylammonium bromide cationic surfactant, was heated to form a viscous gel. The gel was heated and then ignited automatically. As-burnt powder was calcined at temperatures from 700 to 900?C in air to obtain SrO.6Fe2O3 phase. The influence of the calcination temperature on the phase composition of the products has been investigated. X-ray diffraction confirmed the formation of single-phase strontium hexaferrite nanopowder at temperature of 800?C.
Z. Ghiami, S. M. Mirkazemi, S. Alamolhoda,
Volume 12, Issue 2 (6-2015)
Abstract

trontium hexaferrite (SrFe 12 O 19 ) nanosized powders were synthesized by sol-gel auto-combustion method with and without cetyltrimethylammonium boromide (CTAB) addition in the sol with Fe/Sr ratio of 11 (using additional Sr). The resultant powders were investigated by X-ray Diffraction (XRD), Transmission Electron Microscope (TEM), Field Emission Scanning Electron Microscope (FESEM) and Vibration Sample Magnetometer (VSM) techniques. Phase constituents of the synthesized samples which were heat treated at temperatures in the range of 700- 900 ◦C were studied. XRD results revealed that CTAB addition facilitates the formation of single phase strontium hexaferrite at 800 ◦C. Microstructural evaluations with FESEM represented that CTAB addition causes formation of larger particles with a narrower size distribution. VSM results represented that the highest amount of intrinsic coercivity force ( i H C ) was obtained in the sample without CTAB addition and with additional Sr, calcined at 800 ◦C for 1 h which was equal to 5749.21 Oe, while the value of i H C was equal to 4950.89 Oe without additional Sr. The amount of maximum magnetization (M max ) was raised from 48.41 emu/g to 62.60 emu/g using CTAB and additional Sr. The microstructure and magnetic properties of the samples have been explained
A. Allahverdi, Z. Padar, M. Mahinroosta,
Volume 16, Issue 2 (6-2019)
Abstract

It is demonstrated that the addition of organo-modified Na-bentonite (OMB) particles to Portland cement mortar can promote its physical and mechanical properties. A series of experimental works on some important physico-mechanical properties of Portland cement mortars mixed with various dosages of hydrophobic OMB were performed. The obtained results confirm that the OMB provides a dense packing effect. An optimum replacement level of around 3.5% (by weight) at an increased water-to-cement ratio of 0.53 results in an almost 11.43% increase in 28-day compressive strength along with about 20.78 and 16.20% reductions in total volume of permeable pore space and water absorption, respectively. Also, at the optimum replacement level, an increase of about 2.72% is taken place in dry bulk specific gravity.


Page 1 from 1     

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb